Leaderboard

I think I'm finally done with my VFC SCAR-H. Parts: https://docs.google.com/spreadsheets/d/12v6YkUH44YzoyB8OpJLW5I2xgpuF0jbp0GJial5D-7Y/edit?usp=sharing I'm probably going to remove the flashlight, is there a smaller/lower profile one I could use? it's too chunky.

Jeez, some people just don't take care of their gear ?

That's exactly my thoughts as well. Jeez wouldn't that cause some comments in the safe zone. I grizzle when I lose four every mag change.☹ I'm a tight arse though. Lol Regards

KWA QRF Mod3 base - SIG Muzzle Brake - Midwest Industries 4.5" Rail - Replica Scalarworks BUIS - LWRC Inc Compact Stock - PTS MOE MVG and Pistol Grip Inside: - Gate Titan Advanced - Updated VPS system

Finished this today

had guns out as was meant to eb at a game yesterday but couldnt make it so heres a pic of my babies *ignore the scope on the m4*

Today was my designated tinkering day with the MWS before my first post-lockdown game next Sunday at Spartan Woodland, Bristol. I have set the MWS up with all stock bolt, nozzle and valve (NOTE: I have taken 0.15mm off the back of the valve to up the output to about 10fps). Running 0.30g BBs through a CrazyJet 250mm barrel, Modify tan bucking and Laylax hop arm. The shed was a balmy 13degC (or there abouts) and the mags and gas were all at ambient temperature. I gave each mag a 5sec fill, in bursts of 1s and then left for 5mins to let the temp settle. Each gas was given 5 shots over the chrono, with 1s gaps. I often finished up with some full auto to check on cool-down. ***All FPS given as 0.20g BB equivalents*** Nuprol WHITE = 330fps. Still very snappy shooting and not much cool down after 20rd full auto! Nuprol GREEN = 340fps. Benchmark for regular "green" gas. Does cool down a bit. Nuprol RED = 395fps. Eek, well over the limit so I would keep for days when the temps are in single digits. Abbey Vertex Predator = 341fps. Apparently a "powerful gas for heavy weapons" - or just another green gas in an orange can ASG Ultrair = 340fps. Pretty much the same as any other green gas, but Patrolbase have a "Two for £10" offer so I have 8 cans of the damn stuff! Interesting that the difference in Nuprol WHITE and GREEN is only 10fps. I purchased that can for an old TM MP7 I had that (with a tight bore barrel) was WAAAAY too hot to use. That dropped the fps by 20-30 IIRC. Maybe the MWS is just a very efficient system? I checked the accuracy and zeroed the Visionking LPVO scope. 34mm group at 12m bench rested. Should be ok for hitting man sized target at 20-50m.

Current work in progress, but added some more weathering to the paint using some warhammer shade stain, and some sniper tape on the grips!

A friend of mine who is more knowledgeable than me suggested the same thing. I took it apart and gave it a clean it was potentially over lubed as you say. Cheers for the advice and I will see how it runs next game. That’s very reassuring. Good to know and thanks for replying

Hate to tell you this mate but you forgot to put the front end back on before you took the picture ? ?

They are absolute shit lol. I have had loads of AG parts, all but one of them have problems..they clearly test nothing! There is no other explanation for it. Ag nozzle, weird full auto so removed. Ag bolt (sf version) piston wouldn't fit, also spring retainer wouldn't go in without modding. Ag outer barrel, hop issues when installed Ag maritime bolt catch, sticks out about 3mm more than a real one, so you cannot wind the mag release enough to seat it properly. They even admitted to me they screwed it up! Ag mag release, fell in half first use lol..pin just fell out! Ag charging handle, roll pins just fall out Ag lightweight bolt catch, needed heavy filing to move freely. Ag urgi v2 rail, will not fit an mws without their adapter ring which only comes with their outer barrel set which causes hop problems! The v1 rail was fine and had a more durable finish. Saying that, my flash hider is perfectly fine, even they would struggle to fuck that up. They clearly make things based on pictures on the Internet, this is why everything is out of spec..then they clearly do not test finished products on a base mws but on modified ones made from their parts. I hope they go out of business.

I had something similar last summer. Was building some planters for the wife, using a these screws https://www.screwfix.com/p/quicksilver-pz-double-countersunk-woodscrews-trade-case-grab-pack-1000-pcs/32001 Notice how the transparent cover does cross over the handle area? 970 odd screws of various sizes in a heap on the patio, just as the sun was setting.

Ahhhhh, that'll be why then! Yeah that explains it, thanks!

Are you hitting the minimum order quantity? There's a minimum spend of £140 to ship to the UK. Honestly though, your asking for trouble if you do. I'd wait until they have a different courier sorted, which I believe they are doing.

I still see a UPS delivery option for Great Britain. However there is no evidence that things have improved with UPS. Expect 1-2 months for deliveries unless you are very lucky.

i'm the same when running the .48's, especially when it's the dragonuv and the few shots needed to chrono represent half a magazine

Update to the KWA DD M4v7 - - Slim motor (US import from Tactical Parts) - Replica slim DD pistol grip

Hi, ALL! ? This weeks video is about the Mag War, which side are you on? ?? Doing the best with what I have, enjoy it for what it is. ??? ?GAMBLE?

I needed 3 of these a few months ago - surprised how much the cost of these have gone up in recent years

@ak2m4 I did think about it, and it's something to launch when there is enough demand for self-managing airsoft sites. Right not, the site has barely any traffic (~500 visits weekly) because it's fresh, so I'm focusing on airsoft players more than on site owners, as content moderation is often a one-off (do it once and it's done). It all depends on the traction and how helpful something is vs returns it brings to the community. It's hard and time consuming to build content management tools, so I'm deferring that until I am sure a lot of players are relying on PlayAirsoft to discover and engage with sites and venues. It's definitely easier for me to review and edit submissions than it would be to create a whole admin panel with all the things involved, such as security, authentication, spam/flood protection, etc. That said, things can change based on what's going to happen along the way. I like the journey, and the destination is at this point less important. ?

Does anyone find themselves also favouring guns in games that match those in your collection? Counterpoint, did the games influence the purchase. definately guilty of both here

"Great for transporting tens of thousands of BB’s!! Simply dip your speed loader into it and your good to go!" For me its this^^ WhyTF would anyone store loose bb's in here? i am all for novel uses but this was a forehead slap when i saw this

I used to pick those up for £5 a piece at the local militaria store, how times change. Also, why would you want a case marked .22 LR when you can get 50 cal.

I think we can all agree that Angry Gun QC is very hit and miss! My clone Surefire suppressor from them is fantastic and I haven't had any issues with it, and works perfectly with my Acetech Lighter-S tracer unit. The Milspec Buffer Tube also fitted without issue and definitely took the slop out of my Car-15 Stock. However their Maritime Bolt Catch is utter garbage! I initially fitted it to my URGI-1 build as it's part of the Geissele package. But with the bcg in the rearward position as soon as you press the mag release to put in a fresh one, it touches the bolt catch on the other side and throws the bcg forward... ? I had to use a dremmel and remove material from the underside so it no longer made contact... Mate of mine just bought the l119a2 ambi mag release from them for his mws and it flat out doesn't work whatsoever, there's not enough material to hold the mag in place. I mean look at their latest release, the A2 Outer barrels... Who releases a product, that is not fit for purpose and then announces that with a post on Facebook and tells everyone how much material they need to remove with a file!? To make their shitty product fit! ?

I can't recall a specific issue with the barrels but I and others have had endless issues with gas nozzles / NPAS, buffer tubes, rails and rail nuts, supressors/flash hiders, charging handles, bolt catches and mag releases.....

This is exactly how I feel about my outer barrel and suppressor right now

Pretty much all Angry Gun parts only succeed at making people angry about their guns ?

Don't talk to me about Angry Gun right now.... ?

Imagine if it accidentally fell off the table or something...? Tens of thousands of BB's gone in an instant ?