Leaderboard

In the middle of adding a load of blower fans to my helmet when I came across this little gem https://cults3d.com/en/3d-model/tool/amp-arc-rail-comtac-iii-adapter now us Peltor using hobbits can still have the sexy OPS core AMP mounts with out paying out £80 for the AXL adapters or £1500 for replacement AMPs although still jelly of the 3d amplified hearing on the AMPs its almost like video game hacks. Loving this thread BTW.

It looks fucking sick dude. I hope you exaggerate the recoil when you fire it because it's just a massive hand cannon I'd hate to see it pew pew pew BBs and not BANG BANG Yes I make noises for my WH40k miniatures too.

Went to InRange today to spend a couple of hours on the range to test the WE AK74 PMC.... Quite impressed..shoots really well and blown away that I don't need to alter anything as even on Red Gas it's still below 350fps and I get almost 3 reloads on the 40rnd mags...

All Tigered up at Gunman Camp Bravo last weekend (Aug 15th)

Do you shoot people at skirmishes with that revolver or just reach out and poke them with it and claim a knife kill?

Having ordered a new bolt carrier and having extra nozzles, I thought I would put another BCG together , to allow quicker and less fiddly changes when the temperature drops/rises and effects my FPS. well low and behold I only went and lost a critical little piece of shit £3.95 plastic that holds the whole fcuking thing together? Thats not including ridiculous shipping IF they had it in stock The same piece is only valued at £1.00 on Samoon’s store!! ? Sold out everywhere in UK as Samoon in Thailand aren’t shipping to the uk just now, and I need one by Thursday to allow me to head up to Inverness for the big game there this weekend Long story short, I was able to craft a couple out of a piece of nylon water pipe that just happened to be the exact thickness needed that was laying outside abandoned at the back of the garden!! So some patience and a scalpel blade or two got me out of the woods. Also been saved by Facebook and somebody very kindly is supplying me with a few originals ?? Here’s what I needed & here’s my makings :

17 Hours later, I have half a stock: Print came out really nice though. Other half has just started I'm spending so much time printing stuff now (airsoft isn't my only hobby) that I'm seriously toying with the idea of buying (or even building) another printer. I'm really tempted to go down the Voron route for high-speed printing goodness.

Well, a lot of work later and shes finished. HPA'd STAR L86. R-hopped 550mm IB, Polarstar F2 engine inside a custom designed and 3D printed gearbox, custom wiring and microswitches, modifications done to fit the IGL, and more. Max range about 85m (not accurate range for you haters). Im happy. Still need to sort out the two side pins behind the magwell, look into adding a grip of some sort if needed, and toss a light on it.

With a missing fire selector, dodgy safety and a non functioning red dot! Where do I sign?

so it's missing fire selector parts, bonus points for inclusion of the "it's an easy fix" line. especially given ambi selectors reputation for being a pain in the proverbial. it's has some sort of gearbox work in the past, but no specifics as to the parts or the tech who installed them, which given the range of quality of work you see in this hobby could well see it worse than just stock. barrel extended through the suppressor, not strictly a bad thing in itself but wonder wether it's been volume matched...... descriptions of good firing, which will always need taken with a pinch of salt, even ignoring the bias of the sellers own description it's a perceptive description and what one person thinks is good another may not. broken red dot, un-named magnifier half a sling, apparently you get the other half with a plate carrier? at least you get a magpul stock and larue risr... oh wait..... and this is apparently worth pretty much double the rrp?

And yet some how it came back @Tackle great meme drop into the question box

Sounds like you need one of the newer AUBLs. Depending on whether you run a torch or use a very oddly-shaped gun the GLS is going to be your best bet too. Lozart, I unfortunately forgot my non-duty belt platform at the house before leaving on my current work trip so I cant provide pics currently, but I found an better (IMO) way to mount the strap. I took a soldering iron and a leg strap and soldered a hole through it (could also drill and melt the edges like fusing a rope), and drilled a hole through the lowest portion of one of my AUBLs, then bolted it together using a short Safariland bolt and a weld nut. It sits like a UBL, doesnt bunch up in the crotch, and holds to the leg like a leg drop. Maybe give it a try if the knock-off UBL is capable.

Hi, ALL ? Had my 2nd jab today, early in the morning, hopefully no side effects and will be playing this Sunday at Skirmish Wycombe Airsoft! ?? ?GAMBLE?

^ this is my fave pistol holster setup, mid ride with a strap sandwiched in PS loving the morale patch @Lozart

Last weekend’s Battle rifle ? Yes it’s STILL got the label on it ! ?

My current collection. Only a handful… for now ?

Um..ok... Meanwhile - In other news: Now printing it 'properly' at 100% infill, with a channel for a 5mm steel rod to be glued within it. Each half will take 14 hours to print and the whole thing will be 3D printed (two sides and the butt pad as a separate print) with the stock 'fixed' in position. I'll be hitting it with filler primer and sanding it to smooth out the layer lines, then spray it with matte black paint. If anyone has any ideas on how to try replicate that 'moulded plastic roughness' surface finish that you get on polymer bodied guns, it would be much appreciated. They look very cool. I'll be interested to hear how they perform.

Luger meest Ruger ?

I’ll spare the full run down unless someone actually wants it, but I officially think I’m ‘there’ in terms of my ideal kit. Took a lot of trial and error to get there, but extremely happy with where it’s ended up. Swapping between AK and AR is a simple case of changing placard on the chest rig.

/Almost/ finished my custom ICS BCM Hera Arms CQR: I'm getting fancy takedown pins, forward assist, dust cover, trigger guard, getting the mags cerakoted the same colour but leaving the baseplates black, should look good. I've got a black NGAL and one of the new MAWLs on the way, don't know which I'll end up using. Any suggestions for a sling for this? I am thinking maybe a single-point attached to the stock, P90 style? Also finally my PTS ACR stock got off the boat after 3 long months, I loosely slapped the gun together for a pic: Just waiting on a Warhead motor for this and I can put it together. I am getting a black Wilcox mount to swap that with, and might swap to a MAWL on this too depending on how I like the look.

A quick and nasty print to test fitment - 0.30 layer height (accidentally left the upper and lower skin thickness at 0.12 which also doesn't help) and a very low infill leaving a rough finish. Fitment was damned near perfect - just needed the hinge holes opening up a little and a relief hole drilled for the gearbox screw that protrudes a little. Test print was done in two halves then glued - I'm considering creating a channel for a bent steel rod to be sandwiched between the halves for reinforcement before epoxying them together. The final print would be done at 100% infill with a much smaller layer height (around 0.12mm) to smooth things out. Haven't worked out the rear (sliding) bit yet - probably an aluminium tube and 3D printed bushing and stock pad. I'll probably not bother with a sprung button mechanism, rather glue the metal button in place and have it non-folding. Real Steel: Yes, it's ugly. But I like it. Very popular with French and German Police forces - they also use them on MP5s and I've never seen one on an Airsoft gun.

Not made as such, but sprayed my old mtb Camelbak to use at airsoft rather then buying a new camo hydro pouch

Not speedsoft....honestly! I've been modelling a real steel B&T Visor/Gas Mask Stock for a G36 using pictures as a reference. Not sure if I'll actually make this one (although it's dimensionally accurate to TM spec guns), but it's been fun to model nonetheless. RS references:

Can i get in this topic? my 2 Mcx w/ my friend Virtus ver.

Found my speedsoft gun boys. Gonna have to DSG it.