Leaderboard

Yes, he's ex-military but that doesn't mean he's a CQB expert. Plus it's more of the same "CHEETER EXPOSED!!!!!" "EX SQUADDIE DESTROYS AT AIRSOFT" clickbait bullshit. Personally, I'd recommend this guy https://www.youtube.com/user/rwiley1690 (active duty SWAT officer that also plays airsoft) or these guys

Room clearing drill: pull, throw. Frag self, get mediced, repeat. The issue I have with these courses is: who's training you, and are they training you to play airsoft against rental chavs, or to murderise insurgents up a treat (and then you get rinsed by rental chavs). I've seen a few of these advertised on Failbook, typically promoted as being run by an ex-Delta Special Ranger SAS Force Operator. When I've asked how they've established said person's bona fides to be sure that they're not just some grifting Walt, it's been crickets, blocking, or the claim suddenly alters.

See, that didn't take long ?

If you're not playing as a team then you'll learn about as much that's useful on You Tube. Room clearing drills and tactics are all about teamwork, on your own, once you've learnt the basics of the fatal funnel and pieing corners you're pretty much covered.

Hello everyone. I thought I'd chuck together a build thread for my 4.3. Partly in the hope that it'll help someone else but mostly to make @Steveocee's life easier and stop me from pestering him with questions on Instagram! ? "It's been fiddled with" would mostly describe the current state of my 4.3. Absolutely stock from the box it was perfect and lovely! Just look at it! However, a CQB site, very local to me opened up and the need for a tracer took over. So to do this I had to get hold of a threaded outer barrel, which offered me the option (I took it) to chuck in a slightly longer 5.1 barrel, new hop rubber, hop wheel, hop arm and I key. To cut a long story short the loading nozzle snapped after not a very long time stock so an upgraded nozzle was sourced. Also ended up with a Waldo return spring, short stroke buffers and nozzle spring. I'll leave it here for now, but it's a start and I've got the tea to cook. Later I will add what issues I've had, how brilliant it is, oh and how it's a bit broken at the moment ? A few bits planned to make it less broke and more bettererer! Thanks for reading as always!!

Option 3 - Costa VIP slide. Rainbow have some at the moment, I keep saying I won't mod my skirmish build but it's so difficult lol

I play alone quite a lot but every now and again I go with a few buddies, I’d ideally like to do the course with a mate or two so we can all learn the drills and be more fluent when it comes to playing as a team I’ve watched a few of his vids but I’m Not a massive fan of his, I’ll check out camp Sparta and see what’s what I’ve actually watched all of the UF PRO videos, that’s originally what got me wanting to learn more CQB tactics ??

I would suggest that anyone who digs up these pages first requests that the page be archived (by going to http://web.archive.org/) before posting it here.

Mickey Flanagan knows all about how the French do business ? https://www.google.com/url?sa=t&source=web&rct=j&url=https://m.youtube.com/watch%3Fv%3Df92CzN9F270&ved=2ahUKEwjJq47t_KPzAhVTT8AKHdHJBh0Q3yx6BAgIEAI&usg=AOvVaw1lK_vu7gG5f8IsFS6ucrbU

Run by a bunch of arrogant French assholes. If something goes wrong, they basically tell you tough luck and to deal with it yourself. Even asking a simple question, gets you a very curt response Only reason these guys exist is because they have access to some rare stuff. Use Redwolf in Japan or https://emperionstore.com/ you might have to wait a few days more but they look after you and they will work out cheaper.

So the damage, crudely hidden under some gorilla tape for now. I was just chucking a few rounds down the garden when ping, I hear something hit the floor. Look down to see my front sight on the deck and a chunk of my slide missing. This probably has something to do with me not know a great deal about hi capa building but and throwing a Waldo recoil spring in. 130% and a plastic slide probably wasn't going to last very long! I've since taken the Waldo spring out and put the stock TM one back in with a few soft short stroke rubbers. I've left the waldo nozzle spring in at the moment. This is 150% I believe. Future plans? I've been waiting very patiently for the Makeit3D printed slide to come out. I know @Steveocee was fortunate enough to test these out! So there will be no bring colours. All black, as close to original looking as possible for that sleeper build! I know the thread protector kind of spoils that a bit but it was a sacrifice I was willing to make for bright shiney green balls!! Build 1 Makeit3D slide AIP 120% Recoil Spring A few waldo short stroke buffers AIP aluminum recoil spring rod AIP aluminum spring guide plug DP or COW COW C01 blowback housing Waldo loading nozzle (150%) Build 2 Guarder Aluminum OPS slide (Essentially a metal copy of the original plastic one) Waldo 130% Recoil Spring A few waldo short stroke buffers AIP aluminum recoil spring rod AIP aluminum spring guide plug Guarder light weight nozzle housing (Apparently the best fit for the slide) Waldo loading nozzle (150%) The above aren't set in stone and any advice is greatly welcomed and appreciated. The pistol comes out as a secondary to my MTW at places like Anzio and Gaol at the moment, but has and will be used as a HPA powered primary at CQB sites like Hells and probably at Gaol when I next go in December. When used on HPA I tried to limit the FPS to 300fps on 0.2's. Also plan to fit my HPA adapter with a Nine ball gas router and was considering a high flow valve as well to help up the FPS but hopefully lower the required PSI........or will I need more PSI to supply the extra air being used? Hopefully it all makes sense. Looking to order a few bits from Rainbow8, I've seen a few bits in the UK here and there but not much. Any thoughts on which build would be better suited to occasional HPA use? Thank you, good night, much love!

My three repaints courtesy of Halfords Matt OD (good stuff, nice colour & proving fairly durable). UAR w/4x sight, LT M933, springer Galaxy 1911 that is ridiculously good fun. A mate gifted me a DE M56B tri-shot a couple of days ago that I look forward to integrating into my loadout. Its 2-tone blue but I'm not fussed at that.

Picked up some Call of Duty NVG’s and now bursting to get out and play night games. Should be better than walking round the garden with them on until 2am ?

It's almost finished...for now. Just looking to add a set of BUIS. Not sure whether to add the Magpul MBUS, King Arms MaTech 600 or go for the TM MK18. Open to any suggestions from the group. I'm not going for a specific build, just making something I like. That aside my CQBR has been fitted with: Magpul CTR stock and cheek riser Magpul MOE+ grip Magpul MOE trigger guard PTS Radian charging handle HAO Industries Geissele 9.3" SMR copy WADSN PEQ-15 and weapon light with dual pressure switch Angry Gun SOCOM 5.56 suppressor and flash hider Internally I'm keeping it completely stock, standfast the SixG brass nub. Pleased that I also have the G&P MK18 rail as another option too.

Got myself an E&L AK74N, bloody love it and can’t wait to use it:

KJ Works KC02 given the Rogueworx treatment. Currently set up as a single action sniper but can be a semi auto DMR inside of 2 mins with a bolt swap Join the KC02 discord, join us https://discord.gg/kqrxqvTC Hail Saustrich

Double Eagle B&T ACP556 PDW. newest model from DE using the Falcon gearbox. I'll probably do a review soon.

Because in this day and age a lot of people don’t like confrontation, I’ve learnt this over the years in business that indeed you need to talk to people, but for some this is a difficult skill set. Information is everything, and if you are not certain you are right, or if you even know your rights regardless it makes it very hard to have the confidence to have a direct conversation ‘on the spot’. Mail has always allowed people the opportunity for a considered enquiry/answer.