Leaderboard

you could replace the lenses with thick polycarbonate sheet. would require a bit of testing and you would never be sure you could trust them. Also trying to do any sort of activity in a gas mask gets deeply unpleasant quickly. Many have tried most have realised it was a bad idea.

Armour from Sam over at Apextech UK Helmet from USACyberpunk on Etsy RIF is the ARES KEL Tec RDB Edited on Photoshop

Y U NO fly it urself? Is it an original vietnam one? An easy way to tell is if this is fitted

Gonna give these two a whirl next weekend, new cm.045 and just got the m4 back from negative airsoft who de-shitified it, both freshly painted and more importantly s h o r t. Excuse the state of my desk, miniature painting is my other hobby.

Couple of pics of my F2000 as I painted the suppressor to match the gun... and hopefully tomorrow will be it's full debut on the battlefield! It's already got some wear and tear on the paint just from carrying it slung over my shoulder and rubbing against the mags in my belt, tomorrow should see it get more battle-worn - which will be good

Finally got an MP7

People pay extra for premium genuine forces kit. Only the cleverest Chinese ten year olds with the nimblest fingers are used to make the best stuff...

Let's be honest, the Mod, the Government, & every fecker in between have long been guilty of wasting money, serious small country gdp amounts of money, on literally everything & anything, usually with nothing to show for it. Any wonder that the people who actually get their hands dirty for a pittance in comparison feel the need for a Brucie Bonus if the chance arises ?

By which I mean, 75 m/s / 250 fps. Sure, that's hucking a massive steel cylinder slug (63% more bullet per bullet), but it's under 350fps so that's site legal, Reddit said so. Ian McCollum / Gun Jesus has been having a play. Bit of a chat about them: And at the (point-blank) range. A lot of the fun is playing the game of "Well, if I made one, and I could, I'd make it better in this, that and the other ways...". Since they're smoothbores, not spinning the slugs, and there seems to be a hard 75m/s limit on the velocity, using steel BBs than tumbling cylinders seems like an obvious tweak. One interesting point from the chat is that the "barrel" is just there to stop the slugs from smashing into the coils, so arguably you could fling 100J of undersized "unbarreled" steel while saying "not a firearm". ?

Yes but the exhale port has failed and does not work anymore and i can breathe freely and since its cold where i am i thought i coukd make one up

You can buy actual AIRSOFT safe lenses for them , but as big stew said I guarantee you’ll be sweating like a pig in a Mosque if you wear one to play Airsoft . ?

Alright I'll stop spamming after this. Just a quick family photo. The only one missing is my M249 Para

I miss read your post. I though you said “I can’t recommend Halfords paints” ?

Selling all my stuff as a big bundle!! Great deal go and check it out

German and well lubricated

Little black Kochs...

I think I may have a type...

Rogerborg is right on this. Even custom made items are covered by your statutory rights. Specifically if they fundamentally flawed or faulty. If you bought the item over the internet, ie distance selling. You have more time to complain and return but as you seem to have contacted them immediately it should not be an issue. Chargeback and good luck.

I have a E07. Owned it for a few years. Never played a game with it. Keeps breaking. I have 2 double eagles and and another one on the way. Very reliable so far and better built even though my are the polymer versions.

I've only just noticed both switch positions are ON

I am planning on bringing in quite a few from China but not till end of spring after I finish up the new website, also looking into getting some factory made myself (cast), seems the best way forward to get supplies flowing.

Just an FYI - E&C Gearboxes are not a straight drop-in for the Specna Edge - the mock bolt-release mechanism parts will have to be removed from the shell and the spring posts for said mechanism will need to be Dremeled-off. I have an E&C GB in an Edge (supplied by @ak2m4 a year or so ago), and once modded fits fine.

If anyone needs any info or would like to inspect any of the gear I am selling please let me know ?

E&C is exactly what I'm after as they fit perfectly but have been unable to find one anywhere

Crap photo, but getting gear ready for tomorrow. Not sure if going yet, but best to be ready

I do like how the manufacturer is very clear that these are early prototypes, and they're about the least practical way of murderising someone imaginable at the moment. However, they exist, they "work" (about 4 shots out of 10) and they're actually selling them, so kudos for that. Legislation is going to be a pickle for the various fun sponges out there, and I imagine the AFT ATF is frantically coming up with ways to define and ban them just on general principle. Over here, they clearly fall under lethal barrelled firearms, so it's FAC or nothing.

I bought one then had to cancel as it appears the lonex gearbox doesn't fit specna arms lower reciever so still trying to find something that will

Two tone is probably needed but a brightly coloured gun like object in public will not stop the police being called. Not is it bulletproof… As a old pre VCRA codger I’ll tell a story that happen to me some years back. Early 2000’s I was walking along a residential street in Southhall when a teenager of Middle Eastern ethnicity wearing a green m65 coat, red and white shemagh and carrying a G3 comes barrelling out of an alley right into me. Luckily for him I was probably one of the few adults then who had any real knowledge of Airsoft. This probably hasn’t changed. To an extent even within the Police. I told him not to be a stupid dead **** and to think about why. He went inside rapidly to use the toilet. A friend of mine got raided for unrelated reasons and when the Police officers found a TM MP5 in the wardrobe they really though they’d struck detective gold. Anyway it’s all subjective. A tiny flat or small garden you’r far more likely to attract attention. A private estate in the country, no one will care if you are firing a semi-auto shotgun out of the Ferrari’s window while pulling donuts. ?

@steverebo In case you haven't seen. This might be good for you...

Nice to have, wasn’t sure from the image. Less is sometimes more with garnish. I’ve probably got too much on my hood. Try it in a game, you will need to find players who have a more than a 10 second attention span though!

this, we accept that 2-tone is a necessary evil to allow our hobby to continue, and as long as you don't do it to anything rare/nice (ie not commonly available) nobody is going to care.

taofledermaus? theyre the only ones afaik in modern times who've had access to og gyrogets and more importantly the ammo. although afaik there is someone working on doing a modern repro. yeah that's gonna be an interesting video. tbh though, there's still quite aways to go before this becomes practical as a replacement for good ol' gunpowder. no doubt regardless of how fast/slow development happens anything that launches projectiles at that rate will be receiving the banhammer for anywhere outside of america.

Given the pay and conditions, and that the "Armed Forces Covenant" is three empty words that mean absolutely nothing to anybody with an ounce of power of influence, I can't say that I blame them. It's the taxpayer picking up the tab, but in the context of MOD typists getting gibsed £60K for claiming carpal tunnel hurties while squaddies get a couple of grand for having a hand blown off (and only if they can prove it was their wanking hand), I can't say that I begrudge it that much.

Who's this troll? Ban him! Ban his face off!

Not just squaddies, civil servants too. When my work closed an audit of the fun cupboard revealed 2 handguns missing. Although there might have been other things which fell out of the skip ?

….and 90% of airsofters will buy them…

https://www.onlyairsoft.com Really bad for higher prices.

LOL, ain't we all, we're quick to put the boot in but I wonder how many would have bought kit if the price was right ? Obviously that's a rhetorical question & we're all gonna take the moral high ground in disgust ?

UPS can fuck up literally anything. Your experience with the RC order is the exception rather than the rule these days!

Ah.... The old TopCat tactic

So then she says"Strip down, facing me" It was only as I was being put in the back of the van that I realised she meant my credit card.

Generally speaking people buy from people, online ordering is somewhat impersonal but consistent good service does outweigh a small saving for me (from time to time at least). As for in person shopping I definitely prefer to buy from someone that I can build a rapport with (as long as they don't take the piss on pricing). With that relationship usually comes better service and I am prepared to pay extra for that.

It doesn't really make a difference to me as my loyalty is to my bank account so I'll shop at wherever is cheapest. If a shop is going to raise their prices then I go elsewhere

Exactly, and it'll vary from shop to shop, and whether they're making their money on flogging many small items, or a few bigguns. It's annoying to have a range of prices, but that's how free markets should and do work.

Stubby, full auto, Rogueworx KC02 ready for Sunday

I think disassembly is the same as this one

TM base, Nova kit