Leaderboard

Sorry, all I see is Dougle

I might have finally gone too far... Careful VSR-X, custom brass parts made myself, Spring Custom Works SV-98 chassis and carry handle, real POSP 3-9x42, Monoloc adapter, white phosphor PVS-14. Uses custom cut 55 round VSR mags, overhops anything lighter than .46gs and can easily toss .69g BBs 120m (videos on YouTube to prove thats real range and not "airsofter range"). Monoloc and PVS-14 come off for day games obviously.

I’m out of vinyl/rubber wear after I recently off loaded the remainder of my last bondage auction lot to a lead singer/guitarist. I’ve a load of leather gear in assorted sizes which will be available once he’s checked them out Or is that the wrong kind of vinyl?

You scope appears to have some rifle on it.

His gear, his choice. And of course there was a risk after Dunblane. I'm sure he wasn't the only one to offload his gear at the time.

It is true, money can't buy you happyness, but it can buy you bacon and that's pretty damn close.....

I had a modest collection of Spring, AEG's & deacivated SMG's, Rifles & pistols in the 90's but surrendered them all after the Dunblane massacre (lived pretty close at the time, & were all perfectly legal), since I'm now a bit older & missing my youth I've done the typical thing of buying loads of vinyl & Military memorabelia including uniforms, webbing, bergens & a ridiculious quantity of airsoft & replica SMG's, rifles & pistols, I'm guessing I'm not alone?

How about a drinks holder?

It's interesting that some come with the insert and some don't. Mine arrived today - and it does have the Silicone insert pre-installed. Really impressed with the build quality.

The elite of us upgrade our pistols until they become too nice to use, so we can justify buying another (stock) model.

Kit for tomorrow's 27h tournament: MC pouches are there to be tested, if I like the configuration I'll then buy RG ones What I'm carrying left to right: Gerber Paracord Knife; 2x M4 Mags; - TG Small Utility 2.0: GPS (Garmin GPSMap 65s), dummy corded; - TG Large Utility 1.0: Windshirt, half bag of BBs, First Aid Kit; - Emerson electronics pouch: empty as of now, will probably put random admin stuff in there like pens and batteries for my AEG and torches (so 2x 7.4v LiPos, 4x rechargeable 123as, 1x Lithium 123a, 4x AAs for the GPS); 2x M4 Mags; - TG Medium Utility 1.0: Leatherman Wave + with bit extender, dummy corded, Streamlight Sidewinder head torch, navigation stuff like protractor, small 10cm ruler, map, pencil. I will also be carrying my Direct Action Dust Mk2 that will hold: 2L of water inside a Source bladder; Food; DPM MVP Shell (to be left in the car if it doesn't rain along with a mil-tec poncho) Salewa PrimaLoft puffy inside a drybag; Additional bag of BBs (using bio 0.32s) Radio; An awful lot of stupid game specific props like painter's suit, surgical mask and other bullshit like that. Terrain has silly elevation (guesstimated 1200m between descent and ascent over 35 kilometres) and is silly exposed in some parts because it's being held over Carrara Marble open mines (yep, where Quantum of Solace was shot).

Ahoy and welcome. Yes, you've found your people. Even my very modest stash of trash tier RIFs is far more than I can really use. No judgement, but do you actually play with them, or just collect?

I'm a collector, may skirmish in the future tho. It felt morally wrong to keep them, I live just a few miles away at the time. not enough dodgy vinyl for my fat arse.

it's going to be hard to find a UTR stock. try contacting DE direct (http://www.deairsoft.com/utr45.html) and see if they will sell to you direct.

Ooh err

Best of all it means "Cheers" in welsh. (more or less) I love little coincidences like that.

That's the exact same one I have. Quick tip - you may want to trim back the flaps under the filling hole cover. They're quite stiff and can lead to an amount of spillage!

How far do you want to throw this thing ?

Even without the magwell, turns out the mags still need to be pushed up for it to fire 100% of the time. I've reglued a piece of plastic, but this time I scored both the loading nozzle and the piece of plastic first to give it a better surface to glue. It seems to be holding so far, and feeds a BB every time with both the magwell and baseplates on. I'll probably redo it at some point with some epoxy adhesive, but this will hopefully work for tomorrow's day at Tud. Thank you everyone, I really didn't want to have to get another pistol yet.

Whereas us peasant’s have more sense?

Stop ruining my ridiculous fear mongering!

This, right here, is why the internet is awesome

God I'm easily distracted from work... I chucked my main 3 sights on to my AUG in turn, hopefully it'll be helpful to you... The LVPO is a great sight, but I wouldn't run it on the AUG. It is too heavy, I wanted this as a lightweight run'n'gun / CQB rifle. So the Feyachi / KIngScope is the preferred sight. It's on a small riser, I could've taken it off that, but it's the same sight line as the Eotech clone, and it's comfortable. (I wear a lower face mask + goggles combo which doesn't interfere much with the cheek weld) Bah, I forgot my T1 clone, sitting in my kit bag or toolbox. I'll get a pic of that later - it's the nearest thing to the V30 you mentioned.

Tryptophan is an amnio acid used by the body to make serotonin and pork is high in tryptophan. Therefore bacon really is the key to happiness

Aaaawwwww shucks, thanks man! ☺️ Edit: just realised you didn’t mean me! ?

Yeh just shorten the rubber down

Certainly not an expert but whenever this has been the case for me I’ve trimmed it if the C clip won’t engage properly, leaving the hop unit not secured into place with the barrel. If the C clip still fully clips in there isn’t really any reason to though.

I tend to only buy Geoffs Super Precisions, they're the only BB I've never questioned and always perform on point for me. Saying that, this week the .32's were out of stock so I've bought 2Kg of Warhead 32s as they're meant to be "about as good" and they only costed me the same as 1Kg of Geoffs did. Not looking to make a move over but hoping for a good stand in.

Decided to finally remake my mk23 that was "tactically acquired" last year by some rando. Unfortunately Hadron's stuff is taking a bit longer than Id like to get here so this one internally is a mix of Maple Leaf and older Hadron for now.

Picked up a CA53 from @VonGrimm and he was very honest in his description. After a bit of work she's looking a bit better. Just need to sort out the gearbox issue once the part arrives and I might replace the CA Mosfet with a NanoAAB I've got here sitting doing nothing. Before: After: Based on a HK53A2 I fondled in Iraq belonging to the RMP CP teams. I also took a bit of time and gave the XM177 PTW a bit of a service.

So, thanks to @Whats my first MWS build is basically done. It's a "close enough" build for a mk12 mod1 SPR (it's just an m16a4 with a scope and a bipod but ssssshhhhhhhh) I do also have a carry handle and will look out for an m16a1 front so that I can do a quick conversion to an m16a1 for 'Namsoft. I do love me some captured weapons Now I just need a 2nd MWS to build as a little CQB tacticool thing...

Naah, you've still got the filters on ?

I think you had the filters on . ?

Nah they're fine. Apropos of nothing, here's a nice picture of my wife at the beach...