EDcase

Just tell them its faulty and return it

Take off the baseplate from the grip and make sure the connectors are properly on the motor.

Less and less for me too ? Its been several months since I last played. I hope to go again at least once before the end of the year.

Read the forum rules and put them in the correct classified categories

Welcome mate ? Oh yes, we all spend all our time looking for toys and gear ? Good vids. A bit of a change from your others I guess you have a commercial drone license? A good way to describe airsoft: People of all ages playing soldier with toy guns ? Looks like a good site but check here for other places near you: UK Airsoft Map — PlayAirsoft

You don't actually NEED UKARA to buy a realistic replica, most retailers just rely on it as the simplest VCRA exemption when buying online. Its actually at their discretion hence some retailers waive the UKARA requirement for a little extra dosh or face to face dealings as you experienced. The 3 games at one site is not a big deal even if the site sucks. You still gain experience and then can move on once you are registered. Since the UKARA registration lasts one year, most sites will renew for a small fee even if you don't attend again. A private sale technically falls under the same requirement that the seller should be reasonably satisfied the buyer will use the replica for legal airsoft use. I haven't yet heard of a seller being prosecuted for selling a replica used in a crime but its possible.

As above, It means replacing skill with spraying loads of BBs as compensation. These kinds of people are very annoying at a game and are referred to as 'wankers'. (Do a google search) A good player would not need more than 15rps to get the hits they want.

Be careful tying to get as close as possible to 350fps because chrono readings do vary so it might show higher on theirs. Does that CYMA have a full metal tooth piston rack? If not its more likely to strip ...and 28rps in definitely in wanker territory

You can use 11.1v but it will likely break something very quickly. The internals must run super smooth and be made with components that can handle such power. The parts inside will wear faster and any problems will result in more severe failure.

Just use the 'Report' option in any post and the shit will be wiped away.

I've bought a few replicas from them. They are legit but test thoroughly when you receive it... I had to tinker with a few to get them to work properly. I haven't dealt with an actual return but google reviews seem to indicate it might be a bit of a mare.

I didn't test in winter. TM is definitely the king for blowback winter use. Or the ASG/STTI non blowback MK23

In theory yes, a lighter slide will potentially be more gas efficient but in practical terms its a bit more complicated as it also depends on the efficiency of the gas mechanism and nozzle / hop seal. Tokyo Marui's will always be the most efficient because of the plastic slides and quality of internals. My WE M9A1 V2 has a super smooth action so I really like it. I don't know how gas efficient it is compared to others but it will easily empty a couple of mags worth of BBs

Welcome back ? Check out here for sites near you: UK Airsoft Map — PlayAirsoft

Welcome ? Mesh lower face guard is recommended as its protective without adding to heat or goggle fogging. They're cheap too.

Yeah the Specna Arms SA-C10 is reportedly 1.9kg Unfortunately there is a general lack of supply in the UK. I believe its due to the problems in China and is likely to get worse.

AEPs (Auto Electric Pistols) might be OK for CQB but trigger response is slow which isn't good in that situation and aren't powerful enough for woodland games. The P90 could be a good contender if you like the style. The cheaper ones (CYMA/JG) seem to be hard to find now though.

GBBs tend to be easily outgunned against AEGs with high capacity magazines. Cold weather can affect GBBs in case you intend to play over Winter. As Cannonfodder said, you'll need several magazines which are expensive and heavy. Some people do use GBBs successfully so just saying look into it...

Lancer Tactical - LT-35 Battle X 9mm PDW AEG Gen.2 | Patrol Base UK 1.7kg (I can't comment on performance but should be useable for outdoor games) EDIT: Reviews seem to be positive. Search 'Lancer Tactical LT-35'

Vaseline?

This bit looks broken?

No, storage charge is 40% to 50% of full and then left unplugged. You could unplug the charger before it gets to full charge but of course that's less accurate. Selecting 'Storage Charge' with an intelligent charger will actually reduce the voltage if necessary.

Welcome ? Lucky indeed. As Dan pointed out, any 7.4v LiPo is good. Look for the highest mAh that will fit in the battery space. (Usually around 1200mAh) Check here: LiPo Battery for RC Cars, Planes & Boats | Quality LiPo, Low Price | HobbyKing and here: 7.4v Airsoft Battery Packs (vapextech.co.uk) I think this is a good one: Airsoft 7.4V 2600mAh 25C LiPo Cranstock battery with case LP305 Vapextech The connector may need to be changed depending what the gun has. (Probably a clear one called mini-Tamiya) You'll also need a LiPo charger. Look in those shops and also try a search for 'Li-Po charger' Good luck

Ya, duno anything about HPA for airsoft specifically but pressure connectors in general should never vent. As said above, check the valves are clean and free to actuate.

I've ordered about 5 things (not airsoft related) from aliexpress with no problem (yet)