Groot

Single post New member Data collecting Website

While its shit. You kind of need to see it from the shop overs point of view. Every person who calls them with a broken gun, will tell him its only just fired a few rounds and barely seen day light. You can break a perfectly good AEG very quickly with bad ammo, over power battery, spamming the trigger faster than the gun can function, getting a jam and keeping firing, doing some "maintenance on it" etc etc So if i was a retailer I would just assume everyone is a dick and write my policy to match I always assume my AEG is going to break and carry a backup. Because.. I am sometimes right The good news is now you can get it correctly shimmed, take out the ton of grease it doesn't need, maybe short stroke the box, add a stronger spring. Very cheap mods making a huge difference. While its apart replace the hob rubber and nub with a mapleleaf. When life gives you lemons

I had a Vector and sold it after a month. It was an itch i wanted to scratch and it did not fail me. In fact it worked really well. Just after owning it. I did not like the feel or general "pointyness" of it for CQB. Its also fucking heavy. If you haven't actually held one in anger. I would recommend you do that first before making the leap. If you can actually find one.

I agree it is a sickening result, due to the sites being all pussy now and demanding more and more single fire Back when we ran AEGs, carrying 6-9 Hicaps, 9.6v 3300a batteries and 20k of spare bbs in your backpack.. (Just incase.) It was never an issue Make full auto great again!

Sites banning HPA?

They call me captain positive

I love my TM GBB MP7 but i would not even consider trying to carry it around if i was playing the sniper role. It's just too big and heavy. It would get more in the way and not enough usage to make it worth while. Go with a decent pistol. If you must spray and pray. An 18C

Run its on propane. Works a treat. https://www.screwfix.com/p/rothenberger-propane-disposable-gas-cylinder-400g/71092?tc=ST5&ds_kid=92700055262507126&ds_rl=1244066&gclid=Cj0KCQiAkZKNBhDiARIsAPsk0Wgja2gUcVMaUC8x1JG7Ok-2utYqP9UeTQQafyGXid9HenW6nk_FSHIaAn6-EALw_wcB&gclsrc=aw.ds You can get an adapter of Ali for about £9

They are deleting comments too

https://www.combatsouth.co.uk/nuprol-battle-pro-eye-protection-clear-lense-tan-frame/

Honestly, i would recommend getting a set of protective glasses as well. Even with a cap, the cheaper end goggles are notorious for mist.

1) You ain't that big 2) You will be blind 30 seconds into the first game. Ditch the helmet I am relatively healthy and sweat is my biggest concern in a game. Even with my over priced shooting glasses. They get misty and dripping in sweat very quickly. Antifog wipes help but water is water.

Pffft.. Stop being such a normie.. Eye pro is for squares!

Or go the other route. Go heavy, loaded plate carrier, belt line, helmet, back pack etc. Rock a support gun with extra ammo. Under your winter BDU's, wrap your entire body in clingfilm and really sweat out those calories.

No one is going to care if you are husky at an Airsoft game. Yes, you might get a few comments, but that's going to be the same in pretty much any situation you will find yourself in. Nothing can be done about that and needs to be risen above. As long as you get stuck in and take your hits, you will find new friends. Simple as that really. Side note, most of us are rocking dad bods anyway. We aren't all chizzled action heroes

That's him on the left

That said. There is a little known law that states all M14's MUST look like this one

I don't disagree but in the UK if you are running rental power, you will be out range by everyone else on the field. The stock hop on the stock TM is fine but it struggles to lift heavier rounds and even getting to it compared to a normal AEG is a pain in the fucking tit. Don't get me wrong. I am not against expensive AEG's. I am currently sitting here refurbishing all my PTW Pmags

As HPA is the gayteway drug to speedsofting.

Bucking https://www.thecageairsoft.co.uk/maple-leaf-macaron-hop-up-rubber-aeg/ Nub https://www.thecageairsoft.co.uk/maple-leaf-omega-hop-up-tensioner-nub/ How to

Op the best out of the box gun is the one where you spend 2mins removing the upper and swapping out the hop rubber for a maple leaf 50 or 60 and the matching omega nub. This can be done by the most noobie of noobies and requires literally no skill or knowledge of AEG's to achieve. Remove two bolts, lugs. Gently pull upper forwards. Remove hop from barrel, bish bash bosh. You have the most accurate AEG achievable. Personally I would avoid recoils like the plague, they are piss poor power out the box and a whore to work on compared to every other AEG on the market. I would look at a https://www.patrolbase.co.uk/specna-arms-daniel-defense-mk18-sa-e19-edge I got one of these second hand an upgrade the hop and spring in under 5mins. It is as good as my 1k Recoil that I sold because they keep breaking after you up the power and ROF. Really any AEG with the hop upgraded is going to more accurate than any out of the box AEG and it is sooooo simple to do. SO SIMPLE! Don't drink the TM Recoil coolaid.

You are a very forgiving person.

Sorry to hear this. The shit game play and chock points was obvious to me from the layout of the site. The lack of chrono and dangerous play is unforgivable.

Run by a bunch of arrogant French assholes. If something goes wrong, they basically tell you tough luck and to deal with it yourself. Even asking a simple question, gets you a very curt response Only reason these guys exist is because they have access to some rare stuff. Use Redwolf in Japan or https://emperionstore.com/ you might have to wait a few days more but they look after you and they will work out cheaper.