GiantKiwi

Definitely - they're not unobtanium, and new should be looking at around £200-225 for both items to make this.

There is no out of the box semi only MWS, so you'll have to modify the selector to remove the cam that engages the auto sear. 2J might be a stretch, even with a 400mm inner barrel. You will probably need to replace the TM nozzle with a Guns Modify 3.5, use Guns Modify PMags along with that, as combined they have a better seal and thus higher output. Obviously, you'll also want to get an NPAS if you somehow end up going over so you can adjust the output - Jaeger Precision or FEDA, almost all others are flat out junk. You'll also probably need to look at a moving weight buffer and stronger buffer spring to eliminate bolt bounce, which will happen, as the TM's especially are not designed to be run with that high of an output. You'll want an archwick PH+ adjuster for better adjustability with a laylax hop arm to be able to even lift 0.4's. There is one aspect of TM's that is entirely incompatible with AIPSC - the trigger is by far and away the vaguest of any GBBR, break and reset are barely discernable. It can be somewhat rectified by replacing the trigger box with an adjustable one like toxicant makes, but they're also unobtanium at the moment.

Land Warrior used to help with checks if you phoned them, don't know if they still do as its been about 5 years since I last did it.

Magnum's used to be made in Northampton, 14 years ago they shifted manufacturing to China and the quality fell off a cliff.

Apple watch - not worried about it getting shot out, as its taken many a hit at this point without having it happen - if it does, its insured for accidental damage anyway.

Airtac for 1911 adapter. 6.01 is as small as inner barrels go, but the benefits are few, and cons are many.

After the revelation that the Salvo Precision MCX's have copied the toxicant nozzle design, not the MWS spec nozzle have abandoned that idea and gone a different way. So i've instead ordered: WE Scar H GBB V3 Ratech Plastic Magnetic NPAS nozzle for Scar AMG Winter Hammer Spring for V3 WE

Yes I have one. It's trash. It's double stack bb channel, so regularly jams - I had to print a single stack insert to make it work consistently - it requires 145psi to run, where airtac one can run at 100psi. Basically don't bother.

Unfortunately not, the platforms don't tend to care - only impact is usually dilution of efforts.

Could be, but he would need a UK citizen to apply for it and then have that person authorise them to use it with a notarised letter.

Nope. Utter bullshit.

He's made it very easy by not knowing how to mount a scope in rings for a start. The markings are backwards. It's not an iphone flipped photo problem, as the scope is pointed the same direction as most marketing material, ocular lens to the left, objective to the right. If ocular lens is in front of you, and the objective away from you, the "crossfire ii" markings should be on the left hand side with a vortex logo on the left side opposite where the windage turret is, in this example its reversed and is missing very obvious markings across the top of the ocular housing.

Oh look, a fake vortex scope, bet he thinks that is real and contributing to the hyper inflated price.

Oh, he's posted it again further inflating the price. It's a V2 WE GBB which is now end of life, you can buy the V3 Scar H with 3 extra mags brand new for around £420 after shipping and import charges are taken into account from KIC. Has 'semi locked' it because its running at 420fps, but also claims it has a RATech Aluminium NPAS nozzle in it - so I wouldn't trust it to be actually semi locked if he can't even figure out how to twiddle a screw to reduce said fps. Aluminium Nozzle and the TNT hop unit only belong in one place anyway, the bin, as they're significantly worse than the original parts, so they do not add value at all. He's also irreperably damaged the bolt to make the charging handle non-reciprocating, as it is not possible to make that reversible. So, even if you discount the things he will let you option out, he's asking for an £100 premium over new for a fucked Scar H.

Or anyone with common sense, just buys the Double Eagle one for exactly half the price, new with warranty.

Nope. It's designed for the significantly heavier BCG used in the T8/CGS system, it'll put extra unnecessary tension into the FCG and will undoubtedly cause the bolt catch to stop working.

Vapor pressure of propane at room temperature of 25 degrees C is 8.3bar / 122PSI Probably need to be removing them then, if you can make them work without the NPAS great, but I doubt it. If you need a UK supplier of a better NPAS, Jaeger Precision makes them as well https://jaegerprecision.co.uk/products/jaeger-precision-mws-npas-adjustable-valve

Acetech Blaster M module is what they come with.

How old are your FEDA's? This sounds like the old 3D printed resin ones which really, really don't like staying consistent as the adjustment screw has a tendency to walk from them as threadlock can't bind to the resin.

It's not part of the Mainland as far as RM is concerned. PF applies a 70-150% Surcharge on parcels shipped from Mainland to NI - i've shipped maybe 50 parcels to NI in the past 3 years, you may not think it is the case, it definitively is the case and has been the case for over a decade. Just like shipping to the Highland or Islands of Scotland is more expensive. They are not within scope for normal Mainland deliveries. https://www.parcelforce.com/sites/default/files/parcelforce-worldwide-account-surcharges-and-additional-services-guide.pdf DPD for example, won't even ship to areas of the highlands at all.

It can if they're in Northern Ireland. Why when i'm including P&P on sales, I specify "Mainland UK, not NI".

Tracer version, I had to cough up nearly £150 for, only for said tracer to die 6 months later.

Even at used value the PTS version of the Dead Air thing is around £70-80, so not surprised he's making that extra based on the other inflation.

UPL has molybdenum disulfide in it which is worse for rubber than silicone oil.

After a hiatus on airsoft spending for a few months - Miltec Trousers and UBACS in Phantomleaf WASP I Z3A 5.11 Double Duty (RG/BK) Belt Airtac MWS Modular Adapter with M4 Base Airtac x T1P Dead Drop Grip and Trigger Guard x2 RATech WA to WE barrel adapter 5KU WA 9" Outer Barrel Guns Modify 3.5 MWS Nozzle x2 Jaeger Precision MWS NPAS (updated version) as a spare Jaeger Precision TPU buffer for Salvo Precision MCX (if I ever buy one, it'll be handy to have it already) Not having to spend money, because of RMA on warranty, Airtac also replaced my Gen 1 WE M4 Adapter with not only the modular Gen 2, but also the Gen 3 for the V3 WE system. Traded a pile of WE M4 PMags for a TM M&P9 with Nova Slide kit and other gubbins + 3 mags also.