EDcase

Following the theme, here's my JG M4-A (XM177) Changed the foregrip for more correct round version

They had early & late MK2 but seems not available anymore https://www.northeastairsoft.com/index_products.php?GNo=GBB+Replica&TNo=STEN+Machine+Carbine+GBB+Replica (I'm waiting for their UZI but not holding my breath...)

Gotcha ?

https://airsoft-forums.uk/store/

That's the whole point of his posts.... ?

- I think an m110 should do it. Its not an exact science because there are variations between different manufacturers of springs. - You could also cut a few coils from the one you have but you also have to heat the end red hot to flatten the last coil and then file it smooth. - If you get a gun that is only slightly over 350 like 360 or so, you can fire on full auto and stop before it completes the firing cycle. This will keep the spring compressed and leaving it like that for a week or so will reduce the fps. Just test after a week and repeat if necessary. While not as easy as with a quick change spring system, it should be something you can do yourself. Look for disassembly video on YT Take your time and maybe take pictures as you disassemble for reference to put it all back. (The videos should be enough tho)

You must have been rubbing it too hard ?

Remember to clean the barrel first

Yeah, pricy but useful as you say. Hey, if it works for you ?

Almost afraid to ask but how much wazat?

Thanks ? The trick is to know when to stop ?

Nice'n cheap CYMA M14 from Taiwangun Of course it looks a bit worn after I get my grubby hands on it Seems to shoot quite well at 350fps. Will have to wait to test at longer than 15m ?

Absolute is OK but not great. A better place nearby would be Skirmish Wycombe Airsoft in High Wycombe or a bit further is Red Alert Newbury

OK thanks

How long did it take to arrive from when you got the posting email?

Yeah, I'm still waiting for an AA-P01 posted early June. I don't mind waiting as long as it arrives

I imagine that's more comfortable in the firing position but yeah, looks... ?

You can ignore out of stock prices. They're always low to make you stay and look around their shop

You forgot the horse head mask like your avatar ? ?

Ah, didn't see those bad reviews. If they're US based then its hard to know for sure. Luckily very few of us have to experience the returns service and I suspect that different people will have various expectations of 'good' service.

Another possible to add to EU store (Italy) is Emperion http://emperionstore.com/ I only bought a small item but it arrived after 9 days with tracking.

Yeah, the Dynatex .209 all come with one hole at the top. The SWAT VTG came with one at the top and 4 larger ones around the side because it could also take a 12 gauge blanks. (It came with 9mm and .209 adaptors) I didn't need to make the extra holes in the VTG but I had the drill out and I was in 'Driller Killer' mode ? (They were properly measured out so nice and symmetrical) True the .209s don't have that much power but its possible it could land next to someone prone to get it right in the face so I don't want to take any chances. I also have the SWAT VTG that takes the 12gauge but I'm not going to use them as I wouldn't want one going off next to me 9mm is as high as I'll go. The .209s are actually plenty loud enough and less than 10p a throw.

They are excellent. I would suggest drilling a few more vent holes... My concern is if the top gets blocked by dirt (in woodland) or any other item, it will get blown out at dangerous speed. Maybe try playing with boots on... ?

Is your aim really that bad?

Well then its probably not a 'Classic Army' You may have to look inside for any info. Sorry can't help any more than that...