Daveoc33

I'd be surprised any of these didn't fit but you're probably best off measuring. This thread goes on about stocks and buffer tubes: https://arniesairsoft.co.uk/forums/index.php?/topic/177260-milspec-vs-commercial-spec-ar-buffer-tubes/#:~:text=The Mil-Spec buffer tube,tube is 1.168" in diameter.&text=AEGs - Most AEGs are based,many more (most actually).

The pts enhanced polymer stock has reasonable space. There's also the vfc qrs. If you want something slimmer you can get a magpul ctr / MOE with an enhanced (bigger) butt pad and bore out the butt pad. Davescustomairsoft do these ready made or there's and airsoft artisan 3d printed butt pad that does the same thing. Lots more choices too depending on what you like the look of. Nearlty forgot the bcm gunfighter mod 1 also looks like it has some decent space (made by vfc).

They remove the French vat in the checkout process so you can see that bit removed from what you pay before you put card details in. I did get a bit excited seeing the 20% off bit and my impulse buy response was triggered. I've yet to buy anything still though. Didn't see a field for a ukara either but maybe that's further down the checkout process.

Evike now have a warehouse in europe (France apparently) and are shipping to the UK. https://evike-europe.com/ username: Evike Password: Europe for early bird access use WELCOME20 for 20% off your first order. They say that orders for the UK are VAT exempt: https://evike-europe.com/delivery-methods - does that mean they pay the VAT? UK delivery in 2-3 days by DPD (it's not UPS!! ) Free shipping on orders over 150 euros Customs fees apply (whatever that means) Might be worth a punt. At a glance it looks like they are gunfire.com-ish prices with some bettter some worse. LCT stuff with euro to GBP exchange rate and 20% off and free shipping comes out quite reasonable. Some RIFs like the scorpion evo and cyma sr25 are "prohibited from sale" in the UK and a few other countries for reasons unknown.

The green gas mag you received will be for the WE Desert eagle licenced by cybergun. The CO2 full auto desert eagles are made by KWC (licenced by cybergun). the WE is semi auto only. I'm pretty sure this is right. There are 2x full auto desert eagles made by KWC. One is the standard DE and the other is the L6. You'd expect them to both be compatible given that the only real difference is the rail on the lower frame. But as you say you won't be certain of this unless someone out there has both models and can check. If the KWC L6 and standard DE are compatible then you have the problem of finding KWC parts which are quite hard to find. I'm guessing the metal bodies you ordered were for the WE desert eagle or perhaps for the Tokyo Marui.

I'm on the lookout for kjw kc02 (asg special teams rifle) or an asg mp9 (fixed foregrip) if they have them. Or a TM mp7

Does anyone know if the Double Eagle M66 Pro 700 any good out of the box? I haven't been able to find much forum chatter about these. Saying that I imagine it'll be a tough job finding a better shooter than an SRS.

But I'd go away overnight too! Oh wait, my post count isn't high enough for anyone to care.

TM 1911 magazines do fit army armament 1911s but they are a snugger fit.

I've used them many times and they've been fine. They are very friendly and helpful on the phone too if you do need them. I called when they were closed on a Saturday afternoon once and they still picked up and answered technical questions on a gun I'd bought from them.

I have the cyma and it wasn't hopping particularly well out of the box but swapping the rubber and nub is very easy to do. I've done this but haven't been able to test at range yet. Action hobbies sell a g&g p90 whick is nearly as much as the krytac. I like my cyma p90 - long spongy trigger pull though. Bbguns4less.co.uk has the cheapest cyma p90 online I think at £130

This is a big discount but I'm not sure about vorsk pistols. PBVPX502022 50% off vorsk vp-x at patrolbase JD airsoft also doing a vorsk selloff: https://jdairsoft.net/cart/sale I'm guessing there's a reason for this...

I asked firesupport to quote me for a part for an ASG CZ-P09 (a small part where the hammer would hit the firing pin) and ASG responded to them with a quote for a USW part. Comparing exploded diagrams there doesn't look to be many parts shared between the two. But if you need parts firesupport (and probably other retailers) can get them from ASG for you. Might be pricey though. My part was a tiny metal part and they quoted £17.50 all in for something smaller than a 5p piece. I couldn't find a HK retailer that stocked this ASG (KJW) part though. https://actionsportgames.com/files/files/ecom/products/Exploded-drawings/19125_ExplodedDrawing.pdf https://actionsportgames.com/files/files/ecom/products/Exploded-drawings/17657_Exploded.pdf

Forgive me if I'm way off here, but that's a piercing valve looks like its for an action army aac21 (sniper rifle). I didn't think action army made a 1911. Are your leaky mags from an army armament 1911 instead? I've no idea what the gold bits are.

Nothing wrong with using non-gun parts. I think of it as being resourceful. I have one gun which has a purple calpol syringe tube as part of the hop up - just happens to be the perfect size to feed bbs from an M4 mag. This fix is one that I'm most proud and ashamed of at the same time.

finally got it out by getting the whole safety to the vertical position and knocking out the RH safetly first. It was extremely well attached to the left hand safety and bar. Thanks for you advice here @johnnyj

Thanks for this Johnny. I'll give it another go and be careful not to lose that tiny spring. I wonder if my safety is just really well stuck together.

That's a moulding mark I think:

I'm trying to get the hammer assembly out of an ASG CZ P-09 (blowback). I can see the first step of this is to remove the safety. How do I remove the safety catch on this pistol? I can see there a spring that needs to be lifted up and I'm expecting the safety to pull out on the left hand side but it's not coming out. The hammer is back and the safety is disengaged. Is there something I'm missing or do I just need to apply more force to get this safety out? I've looked for youtube videos on this but the closest I've found is the sp01 where it's lift up the spring and out comes the safety. This is what I'm looking at and the spring that I suspect needs to be raised:

My WE/Cybergun Desert Eagle arrived in the same yellow box as yours. The KWC version also has white markings on the slide etc but the WE they are just engraved.

They do/did make hammer spring housings with lanyard attachment but finding somewhere that stocks them is another question. I assume this will fit the DOR but like you already mention some bits on this hi capa are not standard https://airsoft.tiger111hk.com/p21616/5KU-Metal-Hammer-Spring-Housing-For-Marui-Hi-Capa-5.1(Black)/product_info.html

No lanyard loop on it I'm afraid.

It's probably quite a small collection compared to a lot of people here - and my wife hasn't found it yet... The rmr it just the same as any other red dot really, but it's not been shot at yet so I can't say how bullet proof it is. But the TM Dor has very specific mounts. I read on here a sig romeo 5 will also fit (double check that before buying though). I wonder if you could get a romeo clone for cheaper than the TM as £60 is a lot considering what else is out there.

I just bought one of those last week and out of the 30 odd pistols I have this one shoots by far the best in terms of grouping. Gas efficiency I got 4 mags out of a single charge of gas in the garage. So it was somewhere between 5 and 10 degrees. Nothing else I have will do this bar the Mk23. Haven't tried it at long range yet but it'll hop a. 28 fine. A 0.3 seemed to fly flat but I could not overhop it. I've had tm pistols before but not a hi capa. Genuinely impressed by this pistol. The trigger is quite light but no too light and it's very predictable. I got the tm Rmr on this which hold zero - at least for now.

I remember that part. I bought a boneyard army r85 that tried to eat its own blowback unit (the bit you pictured). Tiger111 are good for army armament parts but they are out of stock of the bit you need.i think it's this part: https://airsoft.tiger111hk.com/p31029/Army-R85A1-Assault-EBB-Rifle-Blow-Black-Control-Parts-(No.34)/product_info.html I just took the ebb unit out of mine and it works fine as a non blowback eag.