paradoxum

*hides back-mounted shotgun I've never once had the opportunity to pull out*

Slimmed things down a bit, https://imgur.com/a/fWIJGLk Pretty happy with it now, although I'm definitely getting a slim belt. Going for an AWS SMU.

I picked it up on etsy, I think it was labeled as some lara croft cosplay peice. I still need to figure out a better way to attach it to my hydro pouch - I pretty much had to cut holes in the side of the pouch and thread clips through and even use nuts and bolts to get it on and it looks terrible if you examine it: I was meaning to take it to a sewing shop before lockdown and see if they could sort something cleaner out for me. Any ideas, anyone? Edit: Got rid of the clips and used some velcro straps through some cut holes in the leather;

Nice thanks. I'm actually half considering building a smartgun out of an MG42 and go the whole hog with a steadicam rig and everything. Just setup my new plate carrier; (Templar's Gear Crusader ROC) The big SAW pouch on the back of the belt is for my IR Claymore.

I just googled that. I wonder if it was inspiration for the M41A?

I'm probably going to get the RIS kit for the launcher because it weighs about 5.5kg

Waiting for PRE + elimination panels + qd sling mounts, and will be ordering a real EXPS2 next month.

Someone else that likes to spend crazy money on their guns, I like it.

there you go

Holy crap you guys have some nice setups / stands for your stuff.. and I was thinking about putting up a shelf below my pegboard to hold more stuff thinking that was awesome. SCAR and M41A are disassembled right now awaiting parts.

Spent all day fixing my M9 and rebuilding my SCAR 5 times, workspace is finally clear for now. (Stock adapter is still in china so the stock is just placed there)

MAXX low profile selector levers and renegade enlarged mag release button for my scar, stock vs new: New Stock: I'm still waiting for a trigger, barrel supports, and piston+cylinder head all from MAXX to arrive before I can finish assembling it. Also just bought a Lambda Five barrel for it (303mm). http://www.thecageairsoft.co.uk/lambda-five-inner-barrel-aeg/ Anyone know if either of these fancy takedown pins will fit the single takedown pin from the lower receiver? https://www.specshop.pl/product-eng-16976-Strike-Industries-AR-Extended-Pivot-Takedown-Pins-Black-SI-AR-EPTP-BK.html I cracked half the top of my stock one trying to get it out the first time so it needs replacing anyway.

Sam at KoA? Only other space I can think a battery might fit is down the stock tubing but I don't have the scar adapter yet so I can't test with any butterfly lipos I have.

Huh, well I guess that would have been cheaper to get the £9 stock and that, but already have it now so oh well. Good for anyone searching and finding this though. Still it's a shame it can only fit a 7.4v lipo, is that going to be enough to run my SCARs drivetrain? U-22000 motor, 12:1 gears, M110 spring.

I actually couldn't find one with a big buttpad like that, they were all slim so I assumed they put a custom one on there or something. It would be a hell of a lot of dremeling though, and they've even cut holes all around it for heat dissipation, to be honest with all the other crap I gotta do to this gun I'd rather just pay someone to do it right for me. This is the one I was seeing with the smaller buttpad:

The modified Magpul CTR stock from Dave's is great: https://www.davescustomairsoft.co.uk/CTRbatterypad Has a machined out battery storage in the buttpad, but only big enough for: Here's the stock (w/ larue risr): Battery in the machined out buttpad. Battery installed:

Got my new stock for my SCAR-H and LaRue RISR: Still waiting for the Angry Gun SCAR Gen II Stock Adapter v2.1 so I can attach the new stock, but damn it looks better than the Uggly Boot. I would have preferred an ACR stock but they are impossible to find online and have 0 battery space anyway even if you can get one. I had to dremel the bolt catch / release / reflector for the TM GBB SCAR-L to fit, but I like it a lot more than the stock plastic one from VFC. Who spends £40 for a single bit of something? Warhammer 40k, or airsoft players. lol.

New charging handle on my scar: The reflector panel thing is going to need some dremeling to fit, but looks nicer than the plastic one.

how's this look? green is en-route, purple is to buy/thinking about

It doesn't? isn't the tube hollow? If the part that attaches to the gun has no routing for wiring, I'll just get one of my drills out and make a hole. Won't see it once installed right? Just bought a 40 Mike to go with my 3x master mikes. https://www.fire-support.co.uk/product/airsoft-lnnovations-40-mike-magnum-m203 Are they good batts? I have some 700mah rechargable Klarus ones but I need a few more.

I actually stumbled upon this while looking for stocks after I gave up on the ACR stock: https://www.davescustomairsoft.co.uk/CTRbatterypad Check it out. they are custom-machining the pads to hold a battery. I've already preordered.

Just got these for my VFC SCARH: Angry Gun SCAR Gen II Stock Adapter v2.1: Magpul CTR Stock W/Machined Out Battery Storage Butt Pad (Tan) - https://www.davescustomairsoft.co.uk/CTRbatterypad LaRue Tactical RISR (Reciprocating Inline Stock Riser) Maxx CNC Low Profile Selector Lever (Style B) (Black) Maxx CNC Advanced Speed Trigger (Style E) (Titan) Renegade CNC Tactics Enlarged Magazine Release (B) Aluminium 7075 Charging Handle (Type C) for SCAR (Black) Maxx CNC Aluminum Barrel Screw Support (Style B) (Black)

Yeah Ares Amoeba.

Got a new grip for my SCARH. I think I need to dremel it so the motor hits the pinion gear properly, haven't even tested it yet, but feels and looks much better than the stock. ]]

https://www.davescustomairsoft.co.uk/Flash-Hiders-Muzzle-Brakes/AngryGunSF216FlashHider?sort=p.price&order=DESC&limit=100 Angry Gun flash hider for my scarh cqc! https://imgur.com/a/2Poyrsa