strykerles

I've got a cyma V3 gearbox I got from a boneyard gun if you're interested?

This is from a while ago, not mine it just sticks out as an abomination

E&L for quality, dboys for budget then again I have an ex rental dboys ak74u and it's never missed a beat and it's been battered

my local cqb site has been rebuilt 3 times in 5 years. it's a pain learning the layout again ?

Also that they can put team bands on their legs where they can't be seen, makes it very difficult to find them

I have the cyma SGR12 and just chrono it like a normal aeg. although some chronos have trouble and can sometimes read about 700 fps. at my local if that happens I just fire a few more times to get a better reading it usually reads around 340fps

depends on how many you're talking really I know extreme airsoft do packs of 25 a quick google search brings up some that do 500s

Just had a look around and can find feck all aswell. Does it work? what color laser is it?

Think I'd rather look at that bubblegum capa, and that's ugly

Keep an eye on those teeny tiny springs that will inevitably fly off into the ether never to be seen again Also magnets.....

Maybe unscrew the board so you can apply some heat with it out the way? How well does the hop unit work btw? I have the Dytac SLR which is the older model but identical

West midlands airsoft in Rowley Regis and Ace airsoft in wolverhampton

it can be a tricky as the nozzle return springs are tiny and easily bent. I'd buy some spares just in case. Got mine done by a tech to save the hassle Another known weak point in the mp9 is the disconnector which is made of cheese, wiitech do a steel upgrade part which is worth getting too

yes you can change the valve in the nozzle, did it with mine and its fine now at around 320fps https://www.patrolbase.co.uk/lees-precision-engineering-cnc-machined-power-down-valve-set-for-ksc-kwa-s7-ns2-smg-7-and-mp9

does it slide on at all? if it does then the part that locks may need to be opened up slightly to allow it to go all the way on

if you don't mind from abroad https://www.sixmm.com/en-gb/products/asura-dynamicsb-side-mount-rail-for-ak?_pos=1&_sid=9975c86af&_ss=r I use this one a cyma VSS, this isn't where I got it as it came with an ak I brought https://www.amazon.co.uk/Tactical-Scope-Mount-Picatinny-Weaver/dp/B07DL3HZ3H

@ak2m4 nice 1 thanks

Will these motors be coming in the short shaft variety for us V3 users?

I'd say the bifrost feels more sturdy but it is bigger than the mk2 the brighter C is a popular choice with the speedy bois on their pistols. again though it's bigger than the mk2

I have both and there's not much between them in terms of brightness. For green bbs they are both spot on, although I've never tried the bifrost with red bbs Xcortech have 2 versions of the mk2, one for red bbs and one for green bbs. they will light up the opposite color but not as brightly also the xcortech uses a micro usb for charging and the bifrost uses usb C I've heard very good things about the acetech brighter C for green bbs and it's a popular one at the site I go to regularly

It may be threadlocked on, try heating it up and then try remove it

I did a little digging on this before when i got 2 quake 8s In my quake 8 it's more about the grenade I think. I loaded one with 616 and one with 615 and when the grenade landed upright I noticed no difference landing on it's side the grenade can be erratic with either. thrown with a bit more force on it's side it still went off 90% of the time I think the 615 might have gone off a few more times but can't really remember as it was a couple of years ago I tend to use 615s now so i think that was my conclusion ?

Mad scientist aka Andy at West midlands airsoft based in Rowley regis near J2 M5

I recommend the zci 22tpa or shs equivalent