proffrink

Hey, it's worth it if only 1 in 5 listen and most people are decent enough to read all of the posts even if they don't understand them. It's the threads where a specific question is asked then the OP doesn't choose to read the answers that gets me - why bother asking? I can't really blame them a lot of the time though. This forum - like many others - has a habit of not answering the question a lot of the time and offering unsolicited, purely subjective advice. Hey ho.

It's becoming more apparent on this forum, heh.

HK51B pleaassee

Man, I spent all that time typing and it clearly wasn't read.

You're damn right they're much more satisfying - I don't even own a single AEG anymore for this reason.

Again: Do you have a delta ring? Without one this is more complicated that just buying a new handguard.

AEG or GBB? Either way, they're both pretty good. The obvious drawbacks with a GBB though - cooldown and lower magazine capacity. Though the TM MP7 is pretty good at handling cooldown by GBB standards. I know a few people here own one.

These are a good reference: http://www.airsoft-forums.co.uk/index.php/topic/3779-the-beginners-guide-to-airsoft/ http://www.airsoft-forums.co.uk/index.php/topic/12854-new-player-guides-info/ http://www.airsoft-forums.co.uk/index.php/topic/17294-ians-guide-to-noobism-on-a-tight-budget/ What gun? Probably a G&G CM16 - reliable, cheap and easy to find. Do not spend money on upgrades for your existing sniper rifles or buy a new one - sniper rifles are always a poor choice as a beginner and require a lot of money to become competitive. What gear? Not a lot - keep mags in your pockets until you're comfortable dropping money on webbing or a plate carrier. Buy some decent eye and face protection, speedloader, boots to start with. Everything else is non-essential. Check eBay and classifieds on forums regularly as you'll find stuff a lot cheaper than you would new. Also, you will probably want to sort out your site membership at some point and register with a UKARA retailer as I'm sure you're already probably aware of. This is explained in the UK Law Sub-forum.

I'm sure OP appreciates your feedback guys, but you're really not answering his question. Do you have a rail already on there? Which model of the CM16 do you have? Some have the delta ring you'll need whilst some do not. If you're looking for something cheap and cheerful, then try here - two things though: Despite what that website says, these are not PTS products and are certainly not Magpul licensed - they are knock-offs and will likely not include the trade marks shown in the pictures. I know because I've bought other things from them. They're good quality and very cheap and I'd echo what the other two said: Don't overspend on a G&G CM16. If you want to spend £50 on a rail then put it towards some internal upgrades or something new You will need the delta ring to fit it. Your CM16 may already have one but it may not. An image will help us identify this If not, you're looking at a lot of money for a PTS one (over £30 I'd imagine). Remember, you can't buy PTS Magpul stuff very easily anymore as it was discontinued a while ago. You can buy the real steel stuff, but that's even more dosh and you'll also need a milspec delta ring (which won't fit on an AEG without rethreading the receiver). Edit Here's what the delta ring looks like:

TM G18c GBB objectively best pistol ever made.

My opinion of EBB or non-blow back AEPs is they're very functional, but they're just not as fun as GBBs.

If you can change the spring at all though then do it - it's a much more stable long-term solution. PDI do springs for about £10 each and they last ages - you can quite easily work out which spring is going to give you what output too.

Er, 455mm is the length man not the width (if that's what you mean) so it wouldn't effect the hop compatibility. If you mean 'will the hop window be compatible' then yes, it is. It'll stick out the end by 15mm but like Monty says, but that's not a problem as the flash hider will conceal it. 6.01 will give you a negligible FPS increase, but a wider bore will give you better accuracy and allow a more consistent hop. If you're happy with the FPS of your stock one then go with the 6.03. Also, it'll be slightly less prone to jams.

Basically it's a CO2/HPA conversion kit for many different bolt action sniper rifles. Shizbaski posted a video he made just this evening: http://www.airsoft-forums.co.uk/index.php/topic/28004-tm-vsr-10-mancraft-mod-guide/ Here's the site too: http://shop-mancraft.com/en/

But before you do that, have you removed and lubed it?

Gas sniper rifles are naff in general. You'd be better buying a springer and putting a Mancraft SDiK in it.

I'd say even less. It takes expensive equipment to product them in such bulk for such a small market and I can't imagine too many companies are happy with their machines sitting idle for more than a few hours at a time.

As far as I'm concerned, any airsoft company that has to spend as much on advertising as Nuprol is taking that out of the budget somewhere - they're never going to be as good as some other brands that don't take out placements in magazines, on websites etc. in such a small market. During my adventure to find heavyweight tracer BBs earlier this year, I spoke directly with some distributors and one of the representatives said they were actually in Europe at the time talking with companies. One month later Nuprol .28g and .30g tracers pop up. This was a rep from Yuanjun - they make fairly average BBs according to the reviews. Now I know that it takes longer than a month to get a product like this to market, but the fact that they were the only manufacturer openly advertising 0.28g and 0.30g tracers is enough to make me wonder where these BBs are being sourced. They're a pretty specialist product, and I'd wager there are only a handful of companies making them - maybe Nuprols are simply a rebrand. It certainly wouldn't be the first time in airsoft. That said, their tracers seems fine and some of their stuff is alright but they're never going to compete with some of the other stuff out there

Don't exist above .25g

I've bought the Nuprol .30g tracers and they seem to feed fine. Like you say though, they seem to vary a bit batch-to-batch.

If you're new then electric is going to be easier to maintain and will perform much better on a far lower budget.

From where?

Bit of a bump but I got up far too early this morning and did this - had to wait until not to give it a proper test. The results are good but the finish isn't. It lights up BBs very well: It shines on maybe the 3rd or 4th BB from the hop chamber, so they stay pretty well lit.

If that's the case then AFAIK: Put orange tips on (buy them there and bring them over) Declare them (duh) Cover up any trades with RTV or customs in the US may file them off (especially Glock stuff)

No need to lengthen the hop window unless you want to shoot over ~.35g - an R-Hop will lift everything between .25g to .35g - you'll likely need a mill or a very steady set of hands and a Dremel to lengthen the window and it's not worth it.