novioman

This is happening a lot, saw a pistol that I advertised a few months back on there recently, using my photographs, reported it and it was removed. Thanks for the heads up.

Trouble is the TM will be all plastic, reliable yes, but no comparison to the GHK when handled. I own a couple of GHK’s and they have been 100% reliable when used with green gas. Yes the triggers are heavy compared to most airsoft Glocks, but still very usable. The next GHK Gen 5 is supposed to have a lighter trigger and much easier to access hop up.

I know that you can now buy Co2 mags for the GHK Glock, but I have my doubts about how the pistol will cope with the extra pressure. Samoon do a Co2 kit which I purchased unfortunately. Parts of the kit are good, like the steel inner barrel & hop chamber & steel rails. The Co2 mag was poor, the valve was rubbish, the supposedly Co2 rated nozzle was damaged after a couple of capsules. I have no doubt the Umarex Co2 mag will be good quality, but the pistol is rated up to 150 psi, Co2 is around 800 psi I think. Spoke with the tech at patrolbase about using high power gas in cold weather as they recommend on there website, he said only use black gas when it’s very cold, so how it would cope with Co2 I don’t know. There is a S/H one on the forum at the moment for £295. I know the seller and can guarantee it’s absolutely as new, probably only been test fired, if you don’t want to buy a brand new one at £370.

Unusual for JD airsoft not to wrap parcels well. Brought from them several times and it’s always been in UPS wrapping. Got one this morning funnily enough.

Just seen that Umarex are now doing a Co2 magazine for the GHK Glock’s. No mention of any upgrades needed to use it though. Wonder what GHK think when they recommend the pistol is run at 150 psi.

Fluctuating temperatures is the worst thing

I can’t recommend it that’s for sure.

I have been in touch with them, not helpful. To be honest I wouldn’t want replacements. The parts are of poor quality. I am pursuing them at the moment through PayPal. Pictures of the supposedly Co2 reinforced nozzle. I don’t know if it’s the way the GHK is made internally that has added to the problem, but it has been perfectly fine running on green gas in the past. The broken edge of the nozzle also damaged the gas router on the mag. The mag also has a valve that sticks closed and is so tightly screwed in that even the tech at Firesupport couldn’t remove it. See the video below from Samoon, so they know it’s a problem. IMG_3814.MOV

Purchased the Samoon Co2 Kit for the GHK Glock, while they include a few steel parts that aren’t steel in the pistol originally which seem of reasonable quality, the Co2 mag is awful and the Co2 ( Supposedly ) nozzle broke after 3 capsules. To be fair it was great shooting it with Co2 for the very limited time I could, but for what is a very expensive kit, especially with posting and charges, my advice, DON’T.

They start at 175 p.s.i, not over powered for a metal slide, agreed not suitable for plastic.

The Vorsk gasses are good and state the p.s.i Abbey Ultra is a green gas, but not as powerful as some. I only own steel pistols, but find abbey ultra runs the majority of them in summer, and indeed winter if the mags are warmed, if warming’s not possible I use the Vorsk gasses.

The trigger is not unrealistic, it is actually realistic of the real thing, it’s just that we are use to the lighter triggers that airsoft Glocks come with.

?

As I said most shops except other defences now. A2 Supplies Ltd AirSoft World (recommended) Action Hobbies BZ Tactical Crawley Surplus Stores (recommended) Defcon Airsoft Fire Support (recommended) High Pressure Airsoft JD Airsoft Ltd Just guns Land Warrior Airsoft (recommended) Socom Tactical (recommended) Weekend Warrior Wolf Armouries Zero One Airsoft

Most shops are not requiring UKARA now, the only retailer I know who won’t accept anything else is patrol base, I expect their are more, but that’s the only one I know of.

So you can own a shogun or rifle without license or permit in New York, but you can’t own a bead blaster, what a nonsense.

If Tokyo Marui parts fit then my nova parts you asked about should fit without to much problem.

Ah o.k, that’s sold I guess.

Maybe the one I saw has sold then, it was definitely marked up as a steel kit, and Dan got a magnet to check and it wasn’t steel, but it was a nice pistol, should have bought it there & then.

Hi Jim, Is the other Beretta with the Guarder kit part of the collection as well, think that may be the one I saw marked up as having a steel kit fitted. Regards Doug.

Told me that I guy he knows had the Inoksatu Sig 29 pistol that I am looking for, and gave me his email address. So I emailed him & got a reply next day. He wanted to know where I was located, which I ignored. I asked for photos & a video of the pistol being shot. He sent me two pictures, one of an Inoksatu Colt series 70, and one of a Inoksatu 1911A1, both taken at trade shows by the look of it. I emailed back and said your obviously a dumb arse scammer, and then blocked his email. I have pasted on the original guys user name to Jedi Master.

I will

If you have wanted adverts on the forum, beware of scammers. I have had 2 in the last couple of days.

I would like to upgrade the nozzle on my Inoksatu 1911A1. Has anyone had experience of doing this and can advise on what make of nozzle & internals will fit. Obviously runs on Co2 or powerful gas so needs to be a reinforced nozzle. Thanks